This site uses cookies. By continuing, your consent is assumed. Learn more

144.3fm shares

Ice core dating techniques in the philippines

opinion

An ice core is a core sample that is typically removed from an ice sheet or a high mountain glacier. Since the ice forms from the incremental buildup of annual layers of snow, lower layers are older than upper, and an ice core contains ice formed over a range of years.

Methods for Dating Ice Cores...

Cores are drilled with hand augers for shallow holes or powered drills; they can reach depths of over two miles 3. The physical properties of the ice and of material trapped in it can be used to reconstruct the climate over the age range of the core. The proportions of different oxygen and hydrogen isotopes provide information about ancient temperaturesand the air trapped in tiny bubbles can be analysed to determine the level of Ice core dating techniques in the philippines gases such as carbon dioxide.

Since heat flow in a large ice sheet is very slow, the borehole temperature is another indicator of temperature in the past. These data can be combined to find the climate model that best fits all the available data.

Impurities in ice cores may depend on location. Coastal areas are more likely to include material of marine origin, such as sea salt ions. Greenland ice cores contain layers of wind-blown dust that correlate with cold, dry periods in the past, when cold deserts were scoured by wind.

Radioactive elements, either of natural origin or created by nuclear testingcan be used to date the layers of ice. Some volcanic events that were sufficiently powerful to send material around the globe have left a signature in many different cores that can be used to synchronise their time scales.

Ice cores have been studied since the early 20th century, and several cores were drilled as a result of the International Geophysical Year Ice core dating techniques in the philippines Depths of over m were reached, a record which was extended in the s to m at Byrd Station in Antarctica. Soviet ice drilling projects in Antarctica include decades of work at Vostok Stationwith the deepest core reaching m. Numerous other deep cores in the Antarctic have been completed over the years, including the West Antarctic Ice Sheet project, and cores managed by the British Antarctic Survey and the International Trans-Antarctic Scientific Expedition.

In Greenland, a sequence of collaborative projects began in the s with the Greenland Ice Sheet Project ; there have been multiple follow-up projects, with the most recent, the East Greenland Ice-Core Projectexpected to complete a deep core in east Greenland in An ice core is a vertical column through a glacier, sampling the layers that formed through an annual cycle of snowfall and melt.

At Summit Camp in Greenland, the depth is 77 m and the ice is years old; at Dome C in Antarctica the depth is 95 m and the age years. The bubbles disappear and the ice becomes more transparent. Two or three feet of snow may turn into less than a foot of ice. Ice is lost at the edges of the glacier to icebergsor to summer melting, and the overall shape of the glacier does not change much with time.

These can be located using maps of Ice core dating techniques in the philippines flow lines. Impurities in the ice provide information on the environment from when they were deposited. These include soot, ash, and other types of particle from forest fires and volcanoes ; isotopes such as beryllium created by cosmic rays ; micrometeorites ; and pollen. It can be up to about 20 m thick, and though it has scientific value for example, it may contain subglacial microbial populations[7] it often does not retain stratigraphic information.

Imagine an unbroken chronological record,...

Cores are often drilled in areas such as Antarctica and central Greenland where the temperature is almost never warm enough to cause melting, but the summer sun can still alter the snow. In polar areas, the sun is visible day and night during the local summer and invisible all winter. It can make some snow sublimateleaving the top inch or so less dense. When the sun approaches its lowest point in the sky, the temperature drops and hoar frost forms on the top layer.

Buried under the snow of following years, the coarse-grained hoar frost compresses into lighter layers than the winter snow. As a result, alternating bands of lighter and darker ice can be seen in an ice core.

Ice cores are collected by cutting around a cylinder of ice in a way that enables it to be brought to the surface.

Early cores were often collected with hand augers and they are still used for short holes. A design for ice core augers was patented in and they have changed little since. An auger is essentially a cylinder with helical metal ribs known as flights wrapped around the outside, at the lower end of which are cutting blades.

Hand augers can be rotated by a T handle or a brace handleand some can be attached to handheld electric drills to power the rotation.

About Bethan Davies

Below this depth, electromechanical or thermal drills are used. The cutting apparatus of a drill is on the bottom end of a drill barrel, the tube that surrounds the core as the drill cuts downward.

The cuttings chips of ice cut away by the drill must be drawn up the hole Ice core dating techniques in the philippines disposed of or they will reduce the cutting efficiency of the drill. Drilling fluids are chosen to balance the pressure so that the hole remains stable.

Since retrieval of each segment of core requires tripping, a slower speed of travel through the drilling fluid could add significant time to a project—a year or more for a deep hole. The fluid must contaminate the ice as little as possible; it must have low toxicityfor safety and to minimize the effect on the environment; it must be available at a reasonable cost; and it must be relatively easy to transport.

Newer fluids have been proposed, including new ester-based fluids, low-molecular weight dimethyl siloxane Ice core dating techniques in the philippines, fatty-acid estersand kerosene-based fluids mixed with foam-expansion agents. Rotary drilling is the main method of drilling for minerals and it has also been used for ice drilling.

It uses a string of drill pipe rotated from the top, and drilling fluid is pumped down through the pipe and back up around it. The cuttings are removed from the fluid at the top of the hole and the fluid is then pumped back down.

The core barrel is hoisted to the surface, and the core removed; the barrel is lowered again and reconnected to the drill assembly.

Methods for Dating Ice Cores...

This eliminates the need to disconnect and reconnect the pipes during a trip. The need for a string of drillpipe that extends from the surface to the bottom of the borehole can be eliminated by suspending the entire downhole assembly on an armoured cable that conveys power to the downhole motor.

These cable-suspended drills can be used for both shallow and deep holes; they require an anti-torque device, such as leaf-springs that press against the borehole, to prevent the drill assembly rotating around the drillhead as it cuts the core.

When the core is retrieved, the cuttings chamber Ice core dating techniques in the philippines emptied for the next run. Some drills have been designed to retrieve a second annular core outside the central core, and in these drills the space between the two cores can be used for circulation.

Cable-suspended drills have proved to be the most reliable design for deep ice drilling. Thermal drills, which cut ice by electrically heating the drill head, can also be used, but they have some disadvantages. Some have been designed for working in cold ice; they have high power consumption and the heat they produce can degrade the quality of the retrieved ice core.

Early thermal drills, designed for use without drilling fluid, were limited in depth as a result; later versions were modified to work in fluid-filled holes but this slowed down trip times, and these drills retained the problems of the earlier models.

Explaining the science of Antarctic...

In addition, thermal drills are typically bulky and can be impractical to use in areas where there are logistical difficulties. More recent modifications include the use of antifreezewhich eliminates the need for heating the drill assembly and hence reduces the power needs of the drill.

The drawbacks are that it is difficult to accurately control the dimensions of the borehole, the core cannot easily be kept sterile, and the heat may cause thermal shock to the core.

When drilling in temperate ice, thermal drills have an advantage over electromechanical EM drills: EM drills are also more likely to fracture ice cores where the ice is under high stress.

When drilling deep holes, which require drilling fluid, the hole must be cased fitted with a cylindrical liningsince otherwise the drilling fluid will be absorbed by the snow and firn.

The casing has to reach down to the impermeable ice layers. To install casing a shallow auger can be used to create a pilot hole, which is then reamed expanded until it is wide enough to accept the casing; a large diameter auger can Ice core dating techniques in the philippines be used, avoiding the need for reaming.

An alternative to casing is to use water in the borehole to saturate the porous snow and firn; the water eventually turns to ice.

Ice cores from different depths are not all equally in demand by scientific investigators, which can lead to a shortage of ice cores at certain depths.

To address this, work has been done on technology to drill replicate cores: Replicate cores were successfully retrieved at WAIS divide in the drilling season, at four different depths. The logistics of any coring project are complex because the locations are usually difficult to reach, and may be at high altitude. The largest projects require years of planning and years to execute, and are usually run as international consortiums.

Ice Core Dating Matt Brinkman...

The EastGRIP project, for example, which as of is drilling in eastern Greenland, is run by the Centre for Ice and Climatein Denmark[26] and includes representatives from 12 countries on its steering committee. With some variation between Ice core dating techniques in the philippines, the following steps must occur between "Ice core dating techniques in the philippines" and final storage of the ice core.

The drill removes an annulus of ice around the core but does not cut under it. A spring-loaded lever arm called a core dog can break off the core and hold it in place while it is brought to the surface. The core is then extracted from the drill barrel, usually by laying it out flat so that the core can slide out onto a prepared surface. The surface that receives the core should be aligned as accurately as possible with the drill barrel to minimise mechanical stress on the core, which can easily break.

The ambient temperature is kept well below freezing to avoid thermal shock. A log is kept with information about the core, including its length and the depth it was retrieved from, and the core may be marked to show its orientation. It is usually cut into shorter sections, the standard length in the US being one metre. The cores are then stored on site, usually in a space below snow level to simplify temperature maintenance, though additional refrigeration can be used.

If more drilling fluid must be removed, air may be blown over the cores. Any samples needed for preliminary analysis are taken. The core is then bagged, often in polytheneand stored for shipment. Additional packing, including padding material, is added.

When the cores are flown from the drilling site, the aircraft's flight deck is unheated to help maintain a low temperature; when they are transported by ship they must be kept in a refrigeration unit. There are several locations around the world that store ice cores, such as the National Ice Core Laboratory in the US.

These locations make samples available for testing.